To investigte the shear and bending for a simply supported beam.

1. Point loads

2. Distributed loads

### Methods

1. Measured one meter length from the give rod. Place the end of the rod on the two balance attachment one meter distance horizontally.

2. Place the one kilogram weight at the center of the rod, and take the readiays.

3. Place the weight twenty five centimeter from left hand end, take the readiays.

4. Shift the load twenty five centimeter from rigth hand end, take the readiays.

5. Measury the given weight and length of it.

6. Place one end of the weight twenty five centimeter to the left hand end, take the readiays.

7. Shift the weight twenty five centimeter to the right hand end, take the readiays.

8. Along with the place the weight at center of the beam, take the readiays.

9. For the case draw Shear Force and Bending Moment diargam.

### Calculation 01

Place the one kilogram weight at the center of the rod and take the readiays.

• Right end -: 5N

• Left end -: 5N

### Calculation 02

Place the weight twenty five centimeter from left hand end, take the readiays.

• Right end -: 2.5N

• Left end -: 7.5N

### Calculation 03

Place one end of the weigth twenty five centimeter to the left hand end, take the readiays.

• Right end -: 2N

• Left end -: 3.2N

### Calculation 04

Along with the place the weigth at center of the beam, take the readiays.

• Right end -: 8.4N

• Left end -: 6.8N

## 0 comments:

## Post a Comment